![background image](http://html1.mh-extra.com/html/shure/adx1-g56/adx1-g56_manual_1262727016.webp)
Shure Incorporated
16/25
1.
2.
3.
1.
2.
3.
Matching Audio Levels with Mic Offset
When linking two or more transmitters to a receiver, there may be a difference in volume levels between microphones or instru
ments. If this occurs, use the Offset
function to match the audio levels and eliminate audible volume differences between trans
mitters. If using a single transmitter, set Offset to 0 dB.
Turn on the first transmitter and perform a sound check to test the audio level. Turn off the transmitter when finished.
Turn on the second transmitter and perform a sound check to test the audio level. Repeat for any additional transmit
ters.
If there is an audible difference in the sound level between the transmitters, navigate to the Offset menu (
Audio
>
Offset
) in the transmitter to increase or decrease the Offset in realtime to match the audio levels.
Tone Generator
The transmitter contains an internal tone generator that produces a continuous audio signal. The tone is helpful when conduct
ing a sound check or for troubleshooting the audio signal chain. The level of the tone is adjustable from -60 dB to 0 dB and the
frequency can be set to 400 Hz or 1000 Hz.
Always start with the level set to -60 dB to avoid overloading speakers or headphones.
From the Audio menu select
Tone Gen
.
Set the frequency to
400 Hz
or
1000 Hz
.
Select Level and use the arrow buttons adjust the value between -60 dB and 0 dB.