SHOWTEC Stage Blinder 4 DMX Black, Руководство пользователя

Страница: 12 / 20

11
Ordercode: 30774
Stage Blinder 8 DMX
DIP Switch Setting for DMX Mode
DMX products must have their own "address" to receive DMX signals.
Addresses on the controller are set by flipping the appropriate DMX DIP switches #1 - #9.
Set various DMX addresses by summing the DIP switch values.
A standard DMX address for a 2-channel Showtec Stage Blinder is as follows:
Example
Stage Blinder Address Value DMX DIP Switches ON
Unit 5 9 #1, #4
Switch Value
#1 1
#4 8 +
Total sum: 9
Explanation: Since each unit has 2 channels, each address advances by 2 values (See Address Value
above).
Once the address values have been determined, add DIP switch values to obtain the appropriate
address (DMX DIP Switches ON) for each unit. Flip the appropriate DIP switches on each unit.
Example:
01) If you want to give a Stage Blinder a DMX address of 133, you first have to find the number 133 in the
DMX Chart.
02) Then look at the left side (DIP Switches #1-5) horizontally from 133. In the table you will see #1=ON,
#2=OFF, #3=ON, #4=OFF, #5=OFF.
03) Finally, look at the upper side of the table (DIP Switches #6-9) vertically from 133. In the table you will
see #6=OFF, #7=OFF, #8=ON, #9=OFF.