SHOWTEC Stage Blinder 1 LED, Руководство пользователя

Страница: 16 / 24

15
Order code: 30784
Stage Blinder 1 LED
4. DMX Lost
In this menu you can select the behavior of the device in case of a DMX failure.
01)
Press the UP/DOWN buttons to choose the desired option. There are 2 options available:
● Black Out: in case of a DMX signal failure the device will black out the light output
● Hold: in case of a DMX signal failure the device will use the last properly received DMX signal
ensuring uninterrupted performance
02) Press the ENTER button to confirm your choice.
5. Manual
In this menu you can adjust the intensity of the light output and the frequency of the strobe flash.
01)
Press the UP/DOWN buttons to toggle between Dimmer and Strobe.
02) Press the ENTER button to select Dimmer or Strobe.
03) Press the UP/DOWN buttons to manually set the values for Dimmer or Strobe.
●
Dimmer:
000
no light output
001 – 100 from low to high intensity
● Strobe:
000 – 009
no strobe
010 – 100 from low to high frequency
6. Back Light
In this menu you can set the amount of time the backlight on the OLED display stays on after the last
button is pressed on the control panel.
01)
Press the UP/DOWN buttons to choose the desired option. There 2 options available:
● Always On: the back light of the OLED display does not turn off
● Auto Close (30 s): the back light of the OLED display turns off automatically after 30 seconds of
inactivity after activation of the start screen
02) Press the ENTER button to confirm your choice.