SHOWTEC SC-2412, Руководство пользователя, Страница: 13 / 32

12
Ordercode: 50710
SC-2412
Glossary
● Blackout is a state where all lighting fixtures’ light outputs are set to 0 or OFF.
● Chases are a number of scenes played in sequence. A program which consists of several scenes
(steps) is called a chase while a program which consists of a single scene (step) is called a scene.
● DMX-512 is an industry standard digital communication protocol used in entertainment lighting
equipment. For more information read Sections “DMX Primer” and “DMX Control Mode” in the
Appendix (page 29).
● Fixture refers to your lighting instrument or other device such as a fogger or dimmer which you can
control.
● Scenes are static lightning states.
● Faders are also known as sliders.
● Scanner refers to a lighting instrument with a pan and tilt mirror; however DMX controllers can use this
term to control any DMX-512 compatible device as a generic fixture.
● MIDI is a standard for representing musical information in a digital format. A MIDI input would provide
external triggering of scenes using MIDI devices such as a MIDI keyboard.
● Stand Alone refers to a fixture’s ability to function independently of an external controller and usually
in sync with music, thanks to a built-in microphone.
● Fade fader is used for adjusting the fade time between scenes within a chase.
● Speed fader affects the amount of time a scene will hold its state. It is also known as wait time.
● Shutter is a mechanical device in the lighting fixture that allows you to block the light’s path. It is
often used to lower the intensity of the light output and of the strobe.
● Patching refers to the process of assigning faders to a DMX channel within a fixture.
● Playbacks can be either scenes or chases that are directly called to execution by the user. A
playback can also be considered a program memory that can be recalled during a show.