SHOWTEC POWER SPOT 9 G6 TOUR V1, Руководство пользователя

Страница: 17 / 28

16
Ordercode: 42576
Power Spot 9 Q6 Tour
4. Settings
With this menu you can manually set a few settings.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
The Power Spot 9 has 2 different setting modes.
4.1 LCD Backlight
01) Press the SETUP button to open menu .
02) You can use the UP/DOWN buttons to select the desired LCD backlight time.
The Power Spot 9 has 4 different LCD backlight time settings.
4.2 Factory Reset
01) Press the SETUP button to open menu .
02) Press the SETUP button to open menu .
03) Press the UP/DOWN buttons to confirm the reset.
Reset possibility 2:
To reset the device to its factory default settings, press and hold down the MODE and SETUP buttons for a
few seconds.
5. Info
With this menu you can view the version number of your Power Spot 9.
01) Press the MODE button until the display shows .
02) Press SETUP to enter the Software Version Menu .
03) Press SETUP to show the version number .
6. Auto Mode
With this menu you can set the Power Spot 9 to the auto run program.
01)
Press the MODE button on the device, until the display shows .
02) The device will now run all the available built-in programs in a sequence. It is not possible to adjust
any settings in Auto Mode.