SHOWTEC NanoQ 12 Q4 V1, Руководство пользователя

Страница: 15 / 28

Ordercode: 43710
NanoQ 12 Q4
3. Manual mode
With this menu you can set the device’s static colors.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 options:
Dimmer settings
Zoom settings
Backlight dimmer settings
3.1. Dimmer settings
01)
When the display shows , press the SETUP button to open the menu.
02) Repeatedly press the SETUP button to toggle between the static colors (Red, Green, Blue, White) and
strobe.
03) Once you have chosen the desired color, press the UP/DOWN buttons to increase/decrease the LED
intensity. The adjustment range is between 0-255, from OFF to full ON.
04) You can combine Red, Green, Blue and White to create an infinite range of colors (0-255).
05) Press the SETUP button again to proceed to strobe flash frequency settings.
06) Press the UP/DOWN buttons to increase/decrease the strobe flash frequency. The adjustment range
is between
, from OFF to high frequency.
3.2. Zoom settings
01)
When the display shows , press the SETUP button to open the menu.
02) Press the UP/DOWN buttons to increase/decrease the zoom factor. The adjustment range is between
, from OFF to full zoom.
3.3. Backlight dimmer settings
01)
When the display shows , press the SETUP button to open the menu.
02) Repeatedly press the SETUP button to toggle between the secondary colors (Red, Green, Blue) and
strobe.
03) Once you have chosen the desired color, press the UP/DOWN buttons to increase/decrease the LED
intensity. The adjustment range is between 0-255, from OFF to full ON.
04) You can combine Red, Green, Blue and White to create an infinite range of colors (0-255).
05) Press the SETUP button again to proceed to strobe flash frequency settings.
06) Press the UP/DOWN buttons to increase/decrease the strobe flash frequency. The adjustment range
is between
, from OFF to high frequency.
4. Sound-controlled mode
With this menu you can set the sound-controlled mode.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to increase/decrease the sound sensitivity. The adjustment range is
between
, from OFF to high sound sensitivity.
04) The device will now react to the beat of the background music.
14