SHOWTEC Luna Par 60 Q4, Руководство пользователя

Страница: 26 / 36

25
Luna Par 60 Q4
Product code: 43321
Auto Mode
In this menu you can activate the auto operation mode.
01) Press the UP/DOWN buttons to toggle between Yes and No.
02) Press the SETUP button to confirm your choice.
Program Settings
In this menu you can select one of the 33 color presets or run one of the 15 built-in chases.
01) Press the UP/DOWN buttons to select one of the following 3 options:
●
Mode: Select Mode 01 for the color presets or Mode 02–16 for the built-in chases
● Color/Speed: If you have selected Mode 01, in the Color submenu you can select one of
the 33 color presets. The selection range is 01–33
If you have selected Mode 02–16, in the Speed submenu you can set the
speed of the built-in chase. The adjustment range is 001–100
● Strobe: Add strobe effect. The adjustment range is 00–99, from low to high
frequency
02) Press the SETUP button to confirm the selection.
Slave Mode
In this menu you can set the device as a slave device in master/slave mode.
01) Press the UP/DOWN buttons to toggle between Yes and No.
02) Press the SETUP button to confirm the selection.
Sound Settings
In this menu you can activate the sound-controlled operation mode and adjust the sound sensitivity of
the device. When you select this option, the device runs an auto program reacting to the beat of the
music.
01) Press the UP/DOWN buttons to adjust the sensitivity of the built-in microphone. The adjustment range
is 01–31, from low to high sensitivity.
02) Press the SETUP button to confirm the setting.