SHOWTEC LED PAR 64 AIRCRAFT, Руководство пользователя

Страница: 15 / 24

14
Ordercode: 30743
LED Par 64 Aircraft
Main Menu Options
Built-in Program
Program Speed
Dimmer Warm White
Display Backlight
Delay Mode
DMX 1 Channel Mode
DMX 2 Channel Mode
DMX 3 Channel Mode
The LED Par 64 Aircraft will automatically detect the presence of a DMX signal.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3/5-pin DMX
cable and the DMX controller must be turned on.
The LED Par 64 Aircraft system can operate as a 1, 2 or 3-channel DMX fixture.
1. Built-in Programs
With this menu you can set your desired built-in program mode.
01) Press the MODE button on the device, until the display shows .
02) Press the Up / Down buttons to choose 4 different programs.
2. Program Speed
With this menu you can set your desired speed of the built-in programs.
01) Press the MODE button on the device, until the display shows .
02) Press the Up / Down buttons to choose 16 different speed settings.
1 is slowest, 16 is fastest and sound-controlled.
3. Dimmer Warm White
With this menu you can set your desired dim value.
01) Press the MODE button on the device, until the display shows .
02) Press the Up / Down buttons to choose 255 different dimmer settings.
4. Display Backlight
01) Press the MODE button on the device, until the display shows .
02) Press the Up / Down buttons if you want the backlight On or Off.
03) If you choose Off, the LCD display will dim after 10 seconds. The display will be locked and the 3
menu buttons will not function.
04) To unlock the display, press and hold any of the 3 menu buttons for 7 seconds. The display will light
up and you are able to change your settings.