SHOWTEC Eventlite 177IR, Руководство пользователя

Страница: 10 / 28

9
Ordercode: 44010
EventLITE 177IR
Backside
Fig. 02
04) 3-pin DMX signal connector OUT
05) 4-digit LED d menu buttons
06) Power switch ON/OFF
07) Battery level indicator
08) 3-pin DMX signal connector IN
09) IEC power connector IN + Fuse T1L/250V
Installation
Remove all packing materials from the EventLITE 177IR. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.