SHOWTEC Beacon 360 V2, Руководство пользователя

Страница: 15 / 28

14
Ordercode: 45051
Beacon 360
Main Menu Options
DMX-512 Mode
Channel Mode (9CH, 20CH)
Show Mode
Manual Control mode
Master/Slave Mode
Sound-controlled Mode
Pan Reverse Mode
Tilt Reverse Mode
Display settings
Software Version
Restoration of Factory Settings
Setting Reset
Auto Test Mode
1. DMX-512 Mode
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to set the DMX address between .
04) Press the SETUP button to confirm the address.
2. Channel Mode
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to choose between 2 options: .
04) Press the SETUP button to confirm your choice.
3. Built-in auto programs
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to choose between 2 options: .
04) Press the SETUP button to confirm your choice.