SHOWTEC ACT Fresnel 50 WW, Руководство пользователя

Страница: 21 / 28

20
Order code: 34011
ACT Fresnel 50 WW
6. Fixture Information
In this menu you can view the LED operating hours and the firmware version of the device.
01)
Press the UP/DOWN buttons to select one of the following 2 options:
● Fixture Hour: Provides information about the total hours of operation of the LEDs
● Firmware Version: Shows the current firmware version
02) Press the ENTER button to confirm the selection and view the information.
7. Special Functions
In this menu you can reset the device’s settings to the default factory settings.
01)
Press the ENTER button to open the pop-up submenu for the factory settings:
02) Press the UP/DOWN buttons to choose between NO and YES. If you choose YES, the device’s settings
will be reset to the default factory settings.
03) Press the ENTER button to confirm your choice.