SHOWTEC 50789 Скачать руководство пользователя страница 8

 

 

 

7 

 

  

 

 

Booster Pro 

Product code: 50789 

 

Attention 
General safety
 

 

Do not block the ventilation openings. Without proper heat dissipation and air circulation, the 
internal components may overheat. This can result in product damage. 

 

Do not shake the device. Avoid brute force when installing or operating the device. 

 

If the device is dropped or struck, disconnect the device from the electrical power supply 
immediately. 

 

If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it 
on immediately. Let the device reach room temperature before switching it on, otherwise it may be 
damaged by the formed condensation. 

 

If the device fails to work properly, discontinue the use immediately. 

 

Attention 
This device shall be used only for the purposes it is designed for. 

This device is designed to be used as a DMX splitter/booster. Any incorrect use may lead to hazardous 
situations and result in injuries and material damage. 

This device does not contain user-serviceable parts. Unauthorized modifications to the device will render 
the warranty void. Such modifications may result in injuries and material damage. 

 

Attention 
Do not expose the device to conditions that exceed the rated IP class conditions. 

This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater 
than 12 mm, such as fingers, and no protection against harmful ingress of water. 

 

Requirements for the User 

This product may be used by ordinary persons. Maintenance and installation may be carried by ordinary 
persons. Service shall be carried out only by instructed or skilled persons. Contact your Highlite 
International dealer for more information. 

Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled 
person, for specific tasks and work activities associated with the service of this product, so that they can 
identify risks and take precautions to avoid them. 

Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards 
associated with the service of this product. 

Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons 
include not only users of the product but also any other persons that may have access to the device or 
who may be in the vicinity of the device. 

 

 

Содержание 50789

































Отзывы: