SHOWTEC 50405, Руководство пользователя

Страница: 8 / 32

7
Ordercode: 50405
RDM Commander
Installation
Remove all packing materials from the RDM Commander. Check if all foam and plastic padding is
removed. Connect all cables.
Always remove the batteries before cleaning and/or servicing or if the device is not used for a longer
period of time. Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Battery Charging
01) Connect the included power adapter to the power adapter input on the RDM Commander (05)
and plug the other end of the cable to the appropriate mains power supply.
02) It will now take about 3-5 hours to recharge the battery. Then, it is possible to use the RDM
Commander wireless. The batteries will last up to 6-8 hours.
03) Unplug the device and move the power switch (10) to ON position.
04) The device is now ready for use.
Main Menu Options
01) Turn the jog wheel to select one the following menu options:
02)
Once you have chosen your desired menu, press the jog wheel to open .
03) If you want to edit the parameters, turn the jog wheel .
04) If you want to return to the previous screen, turn the jog wheel to select the return symbol ≤ and press
the jog wheel .
05) The display will now show the previous menu screen.
06) You can repeat steps 1-3 to navigate through all the existing menus.