SHOWTEC 50405, Руководство пользователя

Страница: 18 / 32

17
Ordercode: 50405
RDM Commander
11) Now you have 2 options to choose from:
 UID : Select the device which you want to set a command for.
 DMX_START ADDRESS : Set the value for each parameter (28 in total).
12)
Select the desired menu and press the jog wheel to open.
Notes:
01) In Command: Get , if you have chosen UID , the number of IDs is limited to 45.
02) In Command: Set , if you have chosen UID , the number of IDs is limited to 28.
03) You can carry out GET “DMX_PERSONALITY_DESCRIPTION,” GET “SENSOR_DEFINITION” and GET
“SENSOR_VALUE” only if perform GET “STATUS_MESSAGES” first.
04) You can GET or SET the relevant parameter ID only if you perform GET “PARAMETER_DESCRIPTION”
first.
05) You can carry out GET “STATUS-ID_MESSAGES” only if you perform GET “”STATUS_MESSAGES” first.
5. DMX1000K--RX
01) Select DMX1000K--RX and open the menu.
02) The display will show:
03)
This mode can be used in the way similar to DMX Data--RX mode. See page 10.
6. DMX1000K--TX
01) Select DMX1000K--TX and open the menu.
02) The display will show:
03)
This mode can be used in the way similar to DMX Data--TX mode. See page 12.