SHOWTEC 50405, Руководство пользователя

Страница: 12 / 32

11
Ordercode: 50405
RDM Commander
2.2. Value Display
01) Select Value display and open the menu.
02) Now you can view the signal input values in 3 formats: decimal, hexadecimal and percents.
03) If there is no signal input, the display will show:
04)
If there is signal input, the display will show the channel values in the form of a diagram:
05)
The channels are set by default to 000, while the starting channel is always set to 001.
06) If you want to change the starting channel, select the > in the right upper corner of the display and
press the jog wheel.
07) Now, turn the jog wheel to set the new value. The adjustment range is between 001-512.
08) Press the jog wheel again, to save changes.
09) If you want to toggle between the 3 display formats (decimal, hexadecimal and percents), select
the
> in the left lower corner of the display and press the jog wheel.
10) Now turn the jog wheel to choose the desired display format.
11) Press the jog wheel again, to save changes.
2.3. Min / Max Display
01) Select Min/Max display and open the menu.
02) Now you can view all the values in a simple manner. The display will show:
 Minimum adjustment value of the current channel
 Actual channel value
 Maximum adjustment value of the current channel
03)
If there is no signal input, the display will show:
04)
In order to browse through the values of each channel, turn the jog wheel to select > in the third text
line on the display and press the jog wheel to open.
05) Turn the jog wheel to the left or right to set the desired value.
06) Select the > in the fourth text line and press the jog wheel to reset the current value.