15
Ordercode: 50058
Quick DMX Rack 1024
All three options may be selected at once, or none at all.
Note: only the buttons or the phoenix contacts will trigger the programs
IR Remote Control
The included IR Remote can trigger any program assigned to one of the 16 buttons and can control the
speed of the DMX programs.
See page 15, IR Extension Cable for information on how to enable the IR Remote control.
Buttons:
<1>–<16> - Triggers the program assigned to that numbered button via the Quick
DMX Rack software StandAlone tab.
<17>–<18> - No function
<–> - Slows down all running programs
<+> - Speeds up all running programs
<=> - Sets all running programs to their default speed
IR Extension Cable
To enable IR Remote control:
01)
Plug the included IR Extension cable in the IR port, on the back of the Quick DMX Rack.
02)
Set the sensor on the end of the cable within line of sight of the operator (maximum unobstructed
range of the remote control is 4 m).
03)
Aim the IR remote at the sensor and press the buttons as shown above.
Art-Net™ Universe Access
You can unlock the full potential of the Quick DMX Rack by using the Quick DMX software, as it will
unlock an additional Art-Net™ universe. For this extra option to function, the Quick DMX Rack has to be
connected with the Quick DMX software.
If used, this universe counts towards the total maximum number of universes allowed by the software (6
universes).
Note: The use of Art-Net™ may require additional hardware.
