14
Ordercode: 50058
Quick DMX Rack 1024
Standalone Playback
The Quick DMX Rack can store a DMX program and is able to recall the uploaded program when it is no
longer connected to a computer.
After programming the show on your computer you have to upload it to the Quick DMX Rack:
01)
Navigate to the StandAlone tab.
02)
Add the desired scene or scenes to one or more Timelines.
03)
Assign the program to one of the Zones, using the drop-down menu.
04)
Assign the program to one of the 16 Buttons.
05)
Select from Auto Start, Enable Calendar on-trigger, and/or Enable Calendar off-trigger.
06)
Click Upload data.
Timelines
The Timelines allow for the placement and timing of multiple scenes in a Zone.
Only one set of Timelines can be activated in each Zone at one time.
Zones
4 zones are available for independent programming.
Activating a program in one zone does not affect the programs running in the other zones, but it does
replace any program previously running in that particular zone.
Zones may overlap each other, but if a program has the same value as a program in another zone, the
most recently activated value will take precedence.
Buttons
The Quick DMX Rack has 16 programmable buttons, which can each trigger scenes that are assigned via
the Quick DMX Rack StandAlone tab. Pressing a button will override a previously running program, if they
are both in the same Zone.
Phoenix Connector
The Phoenix connector on the back of the product can be wired to trigger any programs assigned to
buttons 1–8. Connect one end of a switch to one of the COM (ground) contacts. Connect the other end
to the contacts for the program(s) to be triggered. Secure each wire to the Phoenix connector by turning
the captive screws tightly. Do not overtighten the small screws.
Triggers
Aside from the Buttons and Phoenix Contacts, a standalone program uploaded to the Quick DMX Rack
can be activated/deactivated in the following ways:
Auto Start: the program will immediately begin when the product is connected to the power of the
Quick DMX Rack.
Enable calendar ON-trigger: the program will begin at the scheduled time, as long as the product is
plugged into the power of the Quick DMX Rack. Click Edit to set the desired date and time to start
the program.
Enable calendar OFF-trigger: the program will stop at the scheduled time, as long as the product is
plugged into the power of the Quick DMX Rack. Click Edit to set the date and time to stop the
program.
