23
Kanjo Scan 60
Product code: 45012
Display LEDs
In this menu you can select whether the display LEDs will remain on or will turn off after 100 seconds of
inactivity.
01)
Press the UP/DOWN buttons to choose between the following 2 options:
On:
The LED display remains on
Off:
The LED display turns off after 100 seconds of
inactivity
02)
Press the ENTER button to confirm your choice.
Note:
After 50 seconds of inactivity the display will return to the start screen and after 50 more
seconds it will turn off. Press any button to turn the display on.
Display Settings
In this menu you can select the orientation of the display.
01)
Press the UP/DOWN buttons to choose between the following 2 options:
dSI P:
Normal orientation of the display
dS IP:
The display is rotated at 180°
02)
Press the ENTER button to confirm your choice.
Reset
In this menu you can reset the pan/tilt to home position.
01)
Press the UP/DOWN buttons to choose between the following 2 options:
On:
Activate the reset
Off:
Cancel the reset
02)
Press the ENTER button to confirm your choice.
