13
Kanjo Scan 60
Product code: 45012
Angle Adjustment
You can adjust the angle of the device with the 2 adjustment screws (03).
01)
Turn the adjustment screws (03) counterclockwise to release them.
02)
Tilt the device at the desired angle (see Fig. 07).
03)
Turn the adjustment screws (03) clockwise to tighten them. Make sure that the device cannot move
freely after the adjustment screws (03) are tightened.
Fig. 07
Focus Adjustment
Turn the adjustable lens (02) clockwise or counterclockwise to focus the beam.
Fig. 08
