SHOWTEC 43571, Руководство пользователя

Страница: 33 / 48

32
Spectral M800 Q4 IP
Product code: 43571
Reset
In this menu you can reset the custom programs.
01) Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm. The display will
show and the custom programs will be reset.
Color
In this menu you can adjust the color calibration functions.
01) Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle through the following 3 options:
RGB to White: RGB = 255, 255, 255. The color displayed is the specific color which you
have calibrated in CAL2

RGBw menu.
Adjusted output: The RGB output is adjusted to a standard preset universal color.
Different Spectral versions are color-balanced in order to match each other.
Off: The RGB settings are: 255, 255, 255. The RGB values are not adjusted and the output
is the most powerful.
Dimmer
In this submenu you can adjust the dimmer speed.
01) Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (DIM1–4, non-linear
dimmers from fast to slow) and OFF.
Note:
● If you choose OFF, then RGBW and the master dimmer are linear.
● The dimmer settings do not have any influence on the device’s performance in DMX TOUR mode.
The DMX settings override the dimmer settings.