SHOWTEC 43560 Скачать руководство пользователя страница 20

Страница: 20 / 28

Ordercode: 43560

Spectral M300 Q4 MKII

8. Calibration menu

With this menu you can adjust the temperature of the white color presets and adjust the RGB to White
color.
01)

While in main menu, press the

UP/DOWN

buttons

until the display shows

02)

Press the

ENTER

button to set the password.

03)

Insert the password:

UP>DOWN>UP>DOWN

and press the

ENTER

button to confirm.

04)

Press the

UP/DOWN

buttons to toggle between the menus described below.

8.1. White color presets

With this menu you can adjust the temperature of the built-in white color presets.
01)

Press the

UP/DOWN

buttons

until the display shows

02)

Press the

ENTER

button to open the menu.

03)

Press the

UP/DOWN

buttons to choose one of the 11 white color presets:

04)

If you choose

, you will return to the previous step.

05)

Once you have chosen the desired preset, press the

ENTER

button to open the submenu.

06)

Press the

UP/DOWN

buttons to toggle between RED, GREEN, BLUE and WHITE.

07)

Press the

ENTER

button to open the desired color’s brightness settings.

08)

Press the

UP/DOWN

buttons to increase/decrease the color brightness. The adjustment range of

each color is between 0-255, from dark to brightest.

09)

If you choose

, you will return to the 11 presets.

8.2. RGB to White

With this menu you can adjust the temperature of the white color.
01)

Press the

UP/DOWN

buttons

until the display shows

02)

Press the

ENTER

button to open the menu.

03)

Now you can adjust the intensity of the RGB colors. Press the

UP/DOWN

buttons to toggle between

RED, GREEN and BLUE.

04)

If you choose

, you will return to the previous step.

05)

Once you have chosen the desired color press the

ENTER

button to open the desired color’s

brightness settings.

06)

Press the

UP/DOWN

buttons to increase/decrease the color brightness. The adjustment range of

each color is between 0-255, from dark to brightest.

Содержание 43560





























Результаты поиска

Содержание 43560

Отзывы:

Похожие инструкции для 43560

Бренды по названию

Популярные бренды

SHOWTEC 43560, Руководство пользователя

Результаты поиска

Содержание 43560

Отзывы:

Похожие инструкции для 43560

Бренды по названию

Популярные бренды