SHOWTEC 43560, Руководство пользователя

Страница: 19 / 28

18
Ordercode: 43560
Spectral M300 Q4 MKII
6.3. Color
With this menu you can adjust the color calibration functions.
01)
Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following 3 options:
Adjusted output
Off
RGB to White
04) When the display shows , the RGB output is adjusted to a standard preset universal color. In this
way, different Spectral versions are color-balanced in order to match each other.
05) When the display shows , the RGB settings are: 255, 255, 255. The RGB values are not adjusted
and the output is the most powerful.
06) When the display shows , RGB to White is active. This means RGB = 255, 255, 255. The color
displayed is the specific color which you have calibrated in Calibration menu

RGB menu.
6.4. Dimmer
With this menu you can adjust the dimmer.
01)
Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (1-4, from fast to slow) and
OFF.
04) If you choose OFF, then RGBW and the master dimmer are linear.
05) The dimmer settings do not have any influence on the device’s performance in DMX TOUR mode.
The DMX settings override the dimmer settings.
6.5. Save DMX/Blackout
With this menu you can set the device’s behaviour in case of a DMX signal error.
01)
Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options:
DMX data save
Blackout
04) If the display shows , the Spectral will fall back on the last working DMX signal, which will ensure
undisrupted performance.
05) If the display shows , the Spectral will blackout the output, in case of the DMX signal error.
7. Keylock mode
With this menu you can set whether the display becomes locked after remaining idle for 30 seconds.
01)
Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose between ON and OFF .
04) If you have selected ON, press the ENTER button to confirm.
05) It will now take 30 seconds for the device to become locked.
06) In order to unlock the device, press the buttons in the following order: UP>DOWN>UP>DOWN and
press the ENTER button to confirm.
07) The display will show PASS and the device is unlocked.