ShowMagic AV, Руководство пользователя, Страница: 206 / 233

Day Buttons
The day buttons
Clicking on a day button will turn it red, to show that it has been selected, and any events scheduled
for that day are displayed in the large details display.
Creating a Schedule
The auto scheduler will turn on, or off, action buttons automatically on selected days and times.
Therefore, in order to run an event automatically via the scheduler it must first be assigned to an
action button. To create a schedule do the following:
1) Make sure all the events you want to run are assigned to action buttons then click on one of
the day buttons to select it.
2) Using the action panel section, on the right, select the page containing the action button that
you wish to use in the schedule and drag the button into the bottom of the details display on
the left.
In
00:00:00 - - - 00:00:00
will then be displayed to the right of the button’s name.
3) Click on the time digits (to the right of
In
) and type in the time of day that you wish to set
that button to come on or go off at e.g. 00:30:00 (half an hour past midnight).
4) Right-click and left-click on
In
for that schedule step to select between
In
,
On
,
Out
or
Off
,
and this setting will determine whether the event turns on (fades
In
or comes
On
instantly)
or turns off (fades
Out
or goes
Off
instantly).
5) Repeat steps 2 to 4 above for all the other events that you wish to schedule for that day of
the week. When a day contains steps, i.e. it is not empty, its button changes to dark grey to
indicate this.
6) The 4 th and 5 th columns initially set to
N/A
( N ot A pplicable) and 00:00:00 can be used to set
an
Out
time for the event (eliminating the need to have one schedule step to bring it in and
another schedule step to take it out) or to set an event to repeat every 5, 10, 15, 20, 30 or 60
minutes (displayed as
R05
to
R60
) with a time for when that auto-repeat ends.
If
Out
is selected in the 4 th column with a time set to take that event out, then the event will
go out in the same way as it came in, i.e. if
In
was used in the 2 nd column then
Out
will fade
the event out, but if
On
was used in the 2
nd
column then
Out
in the 4
th
column will turn the
event off instantly.
194
ShowMagic SLX Series User Manual