ShowMagic AV Скачать руководство пользователя страница 141 | Manualshive

Страница: 141 / 233

ShowMagic AV Скачать руководство пользователя страница 141

Changing Event Settings Within Sequences

The following settings for each event in a sequence are stored in that sequence independently from
the settings on that event’s original button:

•

Scene fade-in and fade-out

•

Chase speed and slope

•

Volume

•

Volume fade-in and fade-out

•

Pan position

When an event is dropped into a sequence step, a copy of the settings, set at that time for that event,
is stored for that step in that sequence.

Example:

If, for example, you had a wave file with a 2 second fade-in selected for it on the sound panel, and
you then dropped it into a sequence, a 2 second fade-in would be stored in the sequence for that
event step. If you later changed the fade-in time for that event on the sound panel to 4 seconds and
then dropped it into another sequence then a 4 second fade-in would be stored in that other
sequence and so on.

Various settings for events can be changed in a sequence at any time using

[Shift]

with the faders on

the sequence panel, but for other settings you may need to set them on the event’s panel and then
drop the event into the sequence again in order to store those new settings.

Adjusting Settings for Sound Event Steps

If a manual, timed or random sequence contains a sound event then the volume, pan and fade in /
out settings can be adjusted in the following way:
Right-click on the event step (in the event label area), the sequence step details display will be
replaced with an event adjustment display on which you can alter the fade times, but also the
volume and pan positions for each audio channel used in that sound event.
To exit the event adjustment display, simply click on the

Exit

button.

Please Note:

The above settings will only affect that sound event

in that particular sequence

. The original

volume, pan, fade

In

and fade

Out

settings for that sound event on its own sound event button on

the Sound panel remain unaffected.

Section 9 - Sequence Panel

129

«
...
139
140
141
142
143
...
»

Содержание AV










































































































































































































































Отзывы:

Нет отзывов