background image

- 1 - 

Fan Instruction Manual 

Introduction 

Thank you for purchasing a Showa Denki KAIRYU fan. As a specialized manufacturer of fans and 

dust collectors, Showa Denki works diligently to manufacture products with our flow technology 

and rotary equipment technology at their cores. The KAIRYU series are high-performance, 

low-energy-consumption axial fans based on these core technologies. In order to obtain the best 

performance from this product and use it safely for a long time without problems, please handle 

and operate this product according to this instruction manual. Store this instruction manual 

carefully for future reference. 

Applicable types for this instruction manual 

This manual provides instructions on how to set up and use the following fan types: 

Fan type: 

KAIRYU series (Axial fan with adjustable-at-rest blades) 

Fan models: 

A

D



-



 

The characters in 

 will vary according to the fan specifications, including 

size, compatible motor, performance, etc. For details, refer to p. 5 "Types 
and meanings of model indications". 

Fan drive system: 

Motor direct drive type 

Marks used in this manual

 

The marks used in this manual have the following meaning: 

Warning

 

Indicates a point, action, etc. for which improper 
handling may result in death or serious injury. 

Caution

 

Indicates a point, action, etc. for which improper 
handling may result in injury or damage to 
property. 

 

indicates a prohibited action. 

 

indicates a point requiring care. 

 

indicates a compulsory action. 

Содержание KAIRYU

















Отзывы: