Show Tec Galactic TXT, Руководство пользователя

Страница: 26 / 40

25
Ordercode: 51342
Galactic TXT
08) To change the values of the forementioned parameters, press the UP and DOWN cursors.
09) If you need to flip the time display, press repeatedly the key and choose one of the 4 available
options:
Normal View
Hori Vertical Flip
Horizontal Flip
Vertical Flip
5. Countdown Mode
In this menu you can activate a time countdown.
01)
Press the key to proceed to the main menu.
02) While in the main menu, press the UP and DOWN cursors until the display shows .
03) Press the ENTER key, the display will show .
04) Press the ENTER key again. Press the UP and DOWN cursors to set the starting point of the countdown.
The adjustment range is between seconds.
05) Once the starting point has been set up, press the ENTER key again.
06) Press the UP and DOWN cursors to choose the text which will be displayed once the countdown time
has run up. The adjustment range is between . Each number corresponds with
the user-made texts.
07) Press the ENTER key to confirm.
08) Press the SPACE key to start the countdown.
09) If you want to pause the countdown, press the SPACE key again.
10) Similarly, press the SPACE key to resume the countdown.
6. Master/Slave Mode
In this menu you can set the fixture as a slave device.
01)
Press the key to proceed to the main menu.
02) While in the main menu, press the UP and DOWN keys until the display shows .
03) Press the ENTER key. The display will show .
04) The device is now operating in slave mode. It means that it will react the same as the master device.
7. DMX Mode
01) Press the key to proceed to the main menu.
02) While in the main menu, press the UP and DOWN cursors until the display shows .
03) Press the ENTER key. The display will show .
04) Press the UP and DOWN cursors to set the desired DMX address between .
05) Press the ENTER key to set the address.