6
SECTION TWO, ASSEMBLY PROCEDURES
Installation
FIGURE 2.1 - Shor-Pet Grooming Table
TABLE FRAME
TABLE TOP
LEVELING FEET
WITH SCUFF PAD
HYDRAULIC
LIFT ACTUATOR
FOOT OPERATED
LIFT/LOWER PEDAL
Grooming Table Set-up
Adjustable Leveling Feet
After removing shipping material, carefully lay the table on its side to install the leveling feet
and scuff pads.
Enlist help and USE SAFE LIFTING PRACTICES during assembly, installation and
moving equipment.
Keep hands clear of possible pinch areas during installation, which if not avoided,
could result in MINOR to MODERATE INJURY.
Do NOT lift or move the table by the table top.
Always move the table by the base frame using
enough personnel and safe lifting procedures.
STEP 1:
Lay the table on its side to install the
adjustable leveling feet and scuff pads.
STEP 2:
Thread the leveling screws (feet) into the
bottom of the frame. Leave 1/2" of screw
threading exposed. See FIGURE 2.2
STEP 3:
Slip a scuff pad over each leveling foot.
FIGURE 2.2 - Adjustable Leveling Feet
TABLE
FRAME
LEVELING FEET
SECTION
TWO
