8
SCOOTER TILLER CONTROLS (FIG. 2)
Speed Control
Turning this knob to the left, reduces your available maximum speed. Turning it to the right,
increases the available maximum speed.
Battery Gauge
The gauge is marked from “E” empty, to “F” full. For extra clarity, there is a colored graduated
scale ranging from RED, (E) through YELLOW to GREEN, (F).
GREEN indicates ready for use.
YELLOW indicates battery pack shall be charged as soon as possible.
RED indicates to charge battery pack immediately.
Horn
Pressing the yellow Horn button operates an audible buzzer. Use this function to warn
pedestrians of your presence when necessary.
Thumb/Finger Lever Controls
The left thumb/finger lever controls the reverse and the right thumb/finger lever controls the
forward motion. The amount of stroke applied to each lever will determine the speed the
scooter travels at. Release the lever and the scooter will slowly come to a stop and the
electromagnetic brake will be applied.
On/Off Key Switch
Insert the key in the right side of the control panel. Make sure that this switch is in the OFF
position BEFORE getting on or off the scooter.
Switch this switch to OFF while driving, will cause the scooter to stop very abruptly. This is not
recommended.
To protect battery charge, your scooter is fitted with a sleep mode function. If the key switch
is left on without driving for 5 minutes, the scooter will not drive even if the battery gauge shows
full charge. Simply turn the key off and on again and you are ready to go.
Horn
Speed Control
Thumb Lever Control
On/Off Key Switch
Battery Gauge
Thumb Lever Control
Figure 2