Shoprider Altea SL7-3, Руководство пользователя

Страница: 9 / 20

12/7/2006 9
DRIVE/FREEWHEEL OPERATION (FIG 5)
The drive/freewheel lever (yellow lever) is located at the right rear of unit. This lever allows
you to disengage the drive mechanism and push the scooter while in freewheel mode. To
disengage the drive mechanism (neutral), push the lever up (the scooter can now be
pushed). To re-engage the drive mechanism (drive), push the lever down (now the unit
may be driven).
Note: The scooter will not operate while the drive/freewheel lever is in the neutral position
(forward). The scooter must be turned off, lever pushed downward (drive position) and then
turned on in order to reset the circuits.
WARNING! Always re-engage the free wheeling device after use. Failure to do so
may result in injury.
Anti-tip wheels
The anti-tip wheels are located at the rear of the scooter frame (Fig 5). The scooter should
not be used unless the anti-tipping wheels are in place.
Shoprider® is not responsible for damage or injury incurred due to improper or
misuse of the scooter.
Free wheel
lever (yellow)
Anti-tip
wheels
Scooter in
Manual Mode
Scooter in
Drive Mode
Figure 5