ASSEMBLY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.
shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of
this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no
obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.
page
1
of
3
#18000 Portable Wooden Counter with Inner Shelf
BACK PANEL
SIDE PANEL
(2X)
PARTS LIST:
*Recommended: 2 Person Assembly
SIDE PANEL
(2 pcs)
SHELF PANEL
(1 pc)
BACK PANEL
(1 pc)
TOP PANEL
(1 pc)
STEP 1:
On an even flat surface stand both Side Panels upright, as shown
below. While holding the Side Panels upright, simultaneously slide the slots of
the Back Panel into the corresponding vertical slots of both Side Panels.
Note: If needed, using a rubber mallet (sold separately), gently tap the parts
into place.
**RECOMMENDED TOOLS: RUBBER MALLET (Sold Separately)
