background image

ASSEMBLY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.

shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of 

this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no 

obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.

page

 1 

of

 2

Modular Table System

PARTS LIST:

Clear Panel 

(4 pcs)

STEP 2:

  Take 

one panel and 

stand it up on 

its long edge.  

Attach X-

connector to 

long edge of 

clear panel, 

firmly pressing 

down on it to 

make sure it is 

fully engaged 

with panel.

STEP 4:

  Stand assembled 

panels upright on flat 

surface.  Insert another clear 

panel into one of the open 

slots in X-Connector.  Start 

by angling the top part of 

panel into X-connector, 

then push bottom corner 

into bottom of connector.  

Lastly, push the long edge 

of panel firmly towards X-

connector and make sure 

panel is fully engaged with 

channel in X-connector.

H-Connector 

(1 pc)

*NO TOOLS REQUIRED

*TWO PERSON ASSEMBLY RECOMMENDED

STEP 1:

  Peel off the protective plastic film from both sides of clear panels.

X-Connector 

(1 pc)

STEP 3:

  Lay 

panel down 

on flat surface.  

Insert another 

one of the 

clear panels 

into the X-

connector 

perpendicular 

to the panel 

already 

installed.

Angle

top in

Push 

bottom in

Отзывы: