Specifications
Drive Size..................................................................
3
⁄
8
"
No Load Speed..................................................1800 RPM
Average Air Consumption...............................................6
CFM Required PSI...................................................90 PSI
Air Inlet...............................................................
1
⁄
4
" NPT
Inventory
A.
Air Drill ........................................................................1
B.
1
⁄
4
" NPT Quick Connect Fitting (male) ........................1
C.
Chuck Key ..................................................................1
Lubrication
Lubricate your air drill with pneumatic tool oil. If you do
not have a lubricator installed in your air line, place one
drop of pneumatic tool oil into the air fitting daily, as
shown in
Figure 2
.
Figure 1.
Model W1790.
Figure 3.
Lubricating directly into air
fitting.
COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China
Model W1790
3
⁄
8
" Reversible Air Drill
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
EYE INJURY HAZARD!
Always wear safety glasses during
use to prevent serious personal
injury!
INJURY HAZARD!
Always disconnect tool from air to
prevent unexpected operation dur-
ing service!
INJURY HAZARD!
Never exceed 120 PSI!
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2.
Installing your tool.
#9580JM
