Shop fox SHOP FOX W1676, Инструкция по эксплуатации

Страница: 15 / 38

-13-
General
While the main components of the Shop Fox ®
W1676 are assembled at the factory, some
assembly is required. The following is the rec-
ommended sequence best suited for final
assembly.
TOOLS REQUIRED (NOT INCLUDED): You will
need a 6" adjustable wrench, 12mm open-end
wrench, flathead screwdriver, Phillips
®
screw-
driver and 4mm Allen ® wrench.
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
!