COPYRIGHT © JUNE, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China
#12963JB
Figure 1.
Drill press fitted with Model
D4033 drill press table.
Figure 2
. Installed table.
Model D4033
Shop Fox Drill Press Table
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
Damage to your eyes, lungs, and ears could result
from using a drill press without protective gear,
such as safety glasses, a respirator, and hearing
protection.
Specifications
Size ................................. 23
3
⁄
4
" W x 11
7
⁄
8
" D x 3" T
Aluminum Insert T-Slots ........................................2
Wooden T-Slots ..................................................1
Weight ..................................................10
1
⁄
2
lbs.
Construction ...........................Melamine-Coated MDF
Color ........................................................White
Inventory (Refer to Figures 1 & 2)
Qty
Table ..............................................................1
Fence .............................................................1
Fence Stop .......................................................1
Knobs .............................................................5
Clamp Assemblies ...............................................2
Installation
1.
File down any nicks or burrs in the drill press table,
clean the surface, then wipe a very light coat of
machine oil on the table to prevent rust should any
condensation occur.
2.
Place the Model D4033 table onto the drill press
table, align the clamps as shown in
Figure 2
, then
snug them in place.
Table
Fence
Fence
Stop
Knob
Clamp Assembly
