Please read all the instructions before assembly. Page 1 / 2
TABLE TENNIS TABLE INSTRUCTION
Model No.:TT5000
Assembly Instructions
Carefully lay both table tops flat and face down on a soft surface. Unlock and unfold
pre-assembled table top, slide ‘T’ rolling leg into designated position and ensure
marking tape lines up on each side, see figure 1.
Figure 1
Preparation for use
1.
Open the carton and check to ensure all accessories and fittings are complete.
2.
Install ‘T’ rolling leg according to figure 1 above.
3.
Tighten all screws and turn table up right way ready for use.
Care and Maintenance for use of your Table
1.
This item is very heavy. A minimum of two persons should be used to
assemble or move the table.
2.
Two pieces of table top have to be separated before folding or opening.
3.
Do not place table outside for playing.
4.
Do not beat on surface of table with paddle.
5.
Do not place hot goods on table top.
6.
Do not place heavy goods on table to avoid distortion.
7.
Do not use table for any other exercise other then table tennis.
8.
Do not move table around quickly on rugged ground.
9.
Keep table in a dry, well ventilated area to avoid exposure to sun and rain,
which will warp the table.
