Unpacking and Installation of the Switch System
Verifying Crate Condition
The crate has a shock sticker applied. When receiving the create, look for and inspect the shock sticker to confirm that it has not triggered.
The shock stickers turn red if the create has been mishandled or handled roughly. If one of the shock stickers is red, notify the shipper and Mellanox.
Shock Stickers
Opening the Chassis Crate
Before starting the procedure, put the ESD strap on and connect it to a valid ground.
Unscrew and remove the top cover of the crate.
Unscrew and remove the sides of the crate.
Crate Screws
IMPORTANT NOTE: The shock sticker does not necessarily indicate damage to the contents. However, be sure to carefully inspect the
contents of a crate with a triggered sticker.
It is highly recommended to have a screw gun or electric screwdriver for this step.