Shivaki STV-24LEDGR7, Руководство по обслуживанию

Страница: 132 / 175

SY8008A/SY8008B/SY8008C
Electrical Characteristics
(V
IN
= 3.6V, V
OUT
= 2.5V, L = 2.2uH, C
OUT
= 10uF, T
A
= 25°C, I
MAX
= 1A unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
Input Voltage Range VIN 2.5 5.5 V
Shutdown Current I
SHDN
EN=0 0.1 1 µA
Feedback Reference
Voltage VREF 0.588 0.6 0.612 V
FB Input Current IFB VFB=VIN -50 50 nA
SY8008A 0.3
SY8008B 0.25
PFET RON RDS(ON),P
SY8008C 0.2
SY8008A 0.25
SY8008B 0.2
NFET RON RDS(ON),N
SY8008C 0.15
SY8008A 0.8 A
SY8008B 1.2 A
PFET Current Limit I
LIM
SY8008C 1.5 A
EN rising threshold VENH 1.5 V
EN falling threshold VENL 0.4 V
Input UVLO threshold V
UVLO
2.5 V
UVLO hysteresis V
HYS
0.1 V
Oscillator Frequency F
OSC
IOUT=100mA 1.5 MHz
Min ON Time 50 ns
Max Duty Cycle 100 %
Thermal Shutdown
Temperature T
SD
160 °C
Note 1
: Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device.
These are for stress ratings. Functional operation of the device at these or any other conditions beyond those
indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating
conditions for extended periods may remain possibility to affect device reliability.
Note 2 :
θ
JA is measured in the natural convection at TA = 25°C on a low effective single layer thermal
conductivity test board of JEDEC 51-3 thermal measurement standard. Pin 2 of SOT-23-5/TSOT-23-5 packages is
the case position for
θ
JC measurement.
Note 3.
The device is not guaranteed to function outside its operating conditions.
Page 116 of 152