Shinybow USA SB-5654, Инструкция по эксплуатации, Страница: 3 / 12

PAGE 3
SB-5654 INSTRUCTION & OPERATION MANUAL
TABLE OF CONTENTS
3
4
5
6
7
INTRODUCTION
FRONT PANEL
REMOTE CONTROL
TABLE OF CONTENTS
8
9
TYPICAL APPLICATION
10
FEATURES & SPECIFICATIONS
REAR PANEL
LIMITED WARRANTY
This symbol is intended to alert the user to the presence of uninsulated
enclosure tha may be of sufficientmagnitude to constitue a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of important
operational and maintenance (serving) instructions in the literature
accompanying the appliance.
T prevent electric shock do not use this (polarised) plug with an o
extension cord, receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
T prevent electric shock, match wide blade of plug to wide slot,
o
fully insert.
Caution:
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK T I
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. .
RISK OF ELECTRIC SHOCK
DO NOT OPEN
of uninsulated “dangerous voltage” within the products enclosure that
POWER AND CONNECTIONS
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet.
The off state for this unit is called standby mode. In standby mode the unit is designed to consume
a reduced quantity of power compared to normal operating modes.
When not using the unit for a long period of time. Insure that the AC power cord is disconnected from
the wall outlet.
The AC wall outlet should be installed near to the unit and be easily accessible.
Do not plug in or attempt to operate an obviously damaged unit.