CONFORMANCE TEST REPORT
FOR
EN 61000-6-1 / EN 61000-6-3
EN 61000-6-1 / EN 61000-6-3
REPORT NUMBER: ET94S-06-090-01
FOR
FCC 47 CFR/Part 15 Subpart B
FCC 47 CFR/Part 15 Subpart B
Report Number: ET94S-06-090-02
Model Number: SB-5425
Comment Number :
SB-5420R, SB-5420F, SB-5420G, SB-5425
Input: 4x S-Video (Y/C) Mini-din 4P sockets
Stereo Audio (AR/AL), RCA connectors
Output: 2 x S-Video (Y/C) Mini-din 4P sockets
Stereo Audio (AR/AL), RCA connectors
Power Input: DC +12V, 300mA - 500mA
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 1997. All Rights Reserved.
Version 1.2 SEPT 2013
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
CONTENTS
I
NTRODUCTION ...............................................................1
FEATURES & SPECIFICATIONS ....................................2
TYPICAL HOOK-UP & OPERATION ................................3
LIMITED WARRANTY ......................................................4
INTRODUCTION
Congratulations on your purchase of one of the most innovative
Video/Audio switching products on the market today. The Auto
S-Video Switcher for S-Video/Stereo Audio are fully automated
S-Video Switchers. Each has 4 individual S-Video inputs with 2
identical S-Video outputs and is useful for routing signals from
S-Video source devices (such as: VCRs, Camcorders, Game
Consoles, Video CDs, DVD’s, Satellite Receivers, CAT5 Set
Top Boxes, etc.) to S-Video destination devices (such as: VCRs,
DVD-Rs, TV Sets, Video Projectors, etc.). This avoids the need
for constantly moving cables around. In addition to the innovative
Auto mode, the Auto Switchers can operate in a Manual mode for
switching.
This device can be operated in two modes: Auto or Manual. In the
Auto mode, selected by pushing the Auto/Manual button on the
front panel to the DOWN position, the Auto S-Video Switcher will
automatically pick up the input that has a signal present. So, if you
have four devices hooked up to the four inputs and only one has
its power turned on, that device will automatically be switched to
the output. If more than one device has power turned on, the one
with the higher number (SV1, SV2, SV3 or SV4) will be switched
to the output. This enables the unit to operate without an additional
IR Remote Control unit by turning power on and off to the source
devices. When in the Manual mode, selected by pushing the Auto/
Manual button on the front panel to the UP position, selection of
input SV1, SV2, SV3 or SV4 to be routed to the S-Video output in
done by repeatedly pressing the Input Channel button to toggle
through the inputs.
PACKAGE CONTENTS
Check that you have the following components;
• SB-5425 Routing Switcher
• Users Guide
• AC/DC Adapter: 12VDC, @ 300mA
AC/DC Adaptor Types : CE/UL/SAA/BS
1