Shinybow USA SB-4140, Инструкция по эксплуатации, Страница: 7 / 12

5
REMOTE CONTROL
• Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using the front panel input 1-4 select buttons. The supplied IR
remote control.
• Or through the RS-232 serial communications port.
• Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
1. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
2. OUTPUTS: 1 - 4 VGA DESTINATION:
Output - 1 : Switch 4x VGA sources to #1 Monitor Display
Output - 2 : Switch 4x VGA sources to #2 Monitor Display
Output - 3 : Switch 4x VGA sources to #3 Monitor Display
Output - 4 : Switch 4x VGA sources to #4 Monitor Display
INPUTS: 1 - 4 VGA DEVICE SOURCES
Input - Source 1: VGA Signal source device #1
Input - Source 2: VGA Signal source device #2
Input - Source 3: VGA Signal source device #3
Input - Source 4: VGA Signal source device #4
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input-output, Power requirements plus any controls present.
Before using the switcher, please take the time to make certain that the device you wish to connect to its input is functioning properly in
all respects. Verify that the video and audio signals are present and are being displayed properly on a suitable device.
If all is well connect the appropriate cables between the output of the device you wish to distribute to output(s) of the switcher to the
carious devices you wish to feed a signal to. Lastly, connect the AC to DC adaptor, connect the DC connector to the switcher first and then
plug the adaptor into a functional AC outlet.
HOW TO SETUP IR CODES:
IR TYPE : uPD6121G
POWER ON : 28D7 1CE3
POWER OFF : 28D7 1CE3
OUTPUT#1 / INPUT#1 : 2807 0FF0
OUTPUT#1 / INPUT#2 : 2807 10EF
OUTPUT#1 / INPUT#3 : 2807 12ED
OUTPUT#1 / INPUT#4 : 2807 13EC
OUTPUT#2 / INPUT#1 : 2807 04FB
OUTPUT#2 / INPUT#2 : 2807 05FA
OUTPUT#2 / INPUT#3 : 2807 06F9
OUTPUT#2 / INPUT#4 : 2807 0DF2
OUTPUT#3 / INPUT#1 : 2807 10EF
OUTPUT#3 / INPUT#2 : 2807 00FF
OUTPUT#3 / INPUT#3 : 2807 1BE4
OUTPUT#3 / INPUT#4 : 2807 1BE7
OUTPUT#4 / INPUT#1 : 2807 1FE0
OUTPUT#4 / INPUT#2 : 2807 1AE5
OUTPUT#4 / INPUT#3 : 2807 17E8
OUTPUT#4 / INPUT#4 : 2807 16E9