Shinybow USA SB-3888, Инструкция по эксплуатации, Страница: 28 / 40

26
REMOTE CONTROL & REMOTE PROTOCOL COMMANDS
BEFORE MAKING ANY CONNECTIONS OBSERVE THE FOLLOWING:
• Ensure the main voltage supply matches the label on the supplied plug-pack (+/-10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• To yield video/audio to an output, select the input source by using the front panel input buttons, the supplied IR remote control, or
through the RS-232 serial communication port.
• Upon power up the switcher will return to its last used setting before being powered down.
REMOTE CONTROL
IR REMOTE CONTROL KEY :
1. / 2. / 3.
POWER ON AND OFF: Turns on or off the scaler-switch
MUTE: Mutes the HDMI Audio
4. / 5. / 6.
MATRIX/ PIP/ POP buttons
7./ 8. / 9. / 10.
RESOLUTION / EDID / RECALL / MEMORY buttons
11. / 12.
MENU / EXIT buttons
13./ 14. / 15. / 16. / 17.
ENTER / UP / DOWN / RIGHT / LEFT buttons
18./ 19.
RESET / LOCK buttons
20./ 21. / 22. / 23.
AUDIO / VOLUME C / ZOOM buttons
24./ 25. / 26. / 27.
BALANCE / VOLUME- CONTROL - / SWAP buttons
28./ 29.
OUTPUT-1 / OUTPUT-2 buttons
30. / 31. / 32. / 33.
INPUTS: 1. VIDEO, 2. YPBPR, 3. VGA, 4. VGA buttons
34. / 35. / 36. / 47.
INPUTS: 5. SDI, 6. HDMI, 7. HDMI, 8. HDMI buttons
38.
INPUT: 9. HDMI button