Shining 3D AccuFab-L4D Скачать руководство пользователя страница 45

Страница: 45 / 45

AccuFab-L4D & L4K_User Manual_V3.2.20_June 2021

Contact US

Shining 3D Tech Co., Ltd.

Company Headquarters Address: No. 1398, Xiangbin Road, Wenyan Street, Xiaoshan District, Hangzhou

Zip Code: 311215

Tel: 0571-83698151

MSN: [email protected]

Skype: shining_support

Email: [email protected]

Website: http://www.shining3d.com

Shining 3D Technology GmbH.

Address: Breitwiesenstraße 28 70565

Stuttgart, Germany

Tel: +49-711 28444089

E-mail: [email protected]

Facebook: SHINING 3D Dental

upplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifier: 2AMG4-L4DL4K

Responsible Party

–

U.S. Contact Information

Shining 3D Technology Inc.

Address: 1740 César Chávez St.

Unit D. San Francisco, CA 94124

Tel: +1415 259 4787

E-mail: [email protected]

Facebook: SHINING 3D Dental

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Shining 3D Tech. Co., Ltd reserves the right to own. The publication may not be reproduced, transmitted,

transcribed, or translated into any other language for any purpose without the consent of the company.

Disclaimer

This User Manual is a guide to installation, operation, and maintenance, not a product warranty. Shining 3D

Tech. Co., Ltd endeavors to ensure the accuracy and completeness of the manual materials but do not assume any

responsibility for errors or omissions in the documents. At the same time, we reserve the right to interpret and

modify the layout, errors and the like of this User Manual. The documentation is subject to change without notice.

Содержание AccuFab-L4D














































Результаты поиска

Содержание AccuFab-L4D

Отзывы:

Похожие инструкции для AccuFab-L4D

Бренды по названию

Популярные бренды

Shining 3D AccuFab-L4D, Руководство пользователя

Результаты поиска

Содержание AccuFab-L4D

Отзывы:

Похожие инструкции для AccuFab-L4D

Бренды по названию

Популярные бренды