Shini STM-W, Инструкция по эксплуатации

Страница: 15 / 122

Working environment
The machine should be operated:
1) Indoors in a dry environment with max. tempe45
and humidity no
more than 80%.
Do not use the machine:
1) If it is with a damaged cord.
2) On a wet floor or when it is exposed to rain to avoid electrical shock.
3) If it has been dropped or damaged until it is checked or fixed by a qualified
serviceman.
4) This equipment works normally in the environment with altitude within 3000m.
5) At least a clearance of 1m surrounding the equipment is required during
operation. Keep this equipment away from flammable sources at least two
meters.
6) Avoid vibration, magnetic disturbance at the operation area.
Rejected parts disposal
When the equipment has run out its life time and can not be used any more,
unplug the power supply and dispose of it properly according to local code.
In case of fire, Co dry powder fire extinguisher should be applied.
2
Please abide by the safety guide when you operate the machine so as
to prevent damage of the machine and personal injuries.
Fire hazard
General Description
All electrical components should be installed by qualified electricians.
Turn off main switch and control switch during repair and
maintenance.
Warning High voltage
This mark is attached on the cover of the control box.
Warning Be careful
Be more careful when this mark appears.
Warning
High temperature, take care of hands! This label is attached on the
surface of heating parts.