T262
OPERATION
X7502341402
25
©
06/20
ECHO Incorporated
2.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the clear
fuel tank return line. Pump bulb an
additional 4 or 5 times.
3.
Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle and throttle trigger
lockout with left hand. Rapidly pull
recoil starter handle/rope (D) until
engine fires.
Note: If engine does not start
after 5 pulls, use Cold Start
Procedure.
Stopping Engine
1.
Throttle
Release throttle trigger and allow
engine to return to idle before
shutting off engine.
2.
Stop Switch
Move stop switch (A) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
C
D
A
