Shindaiwa DGK7F, Руководство владельца и оператора

Страница: 23 / 48

20
8-1. Checking Engine Oil
To check the engine oil, keep the equipment in leveled position, remove the oil level indicator
and wipe so that no oil remains, and then re-insert the dipstick fully. Prior to starting the engine,
make sure to fill the engine oil through the oil filler until it reaches the MAX line.
< Note >

Wait at least five minutes or more after stopping the engine before checking the oil level again.

An accurate oil level reading cannot be obtained if the generator is not placed in leveled position.

Do not overfill with oil to avoid engine damage.
(1) Types of Engine Oil
Use only API service-type CF class.
(2) Engine Oil Viscosity Grades
Use a diesel engine oil with an appropriate viscosity corresponding to the ambient
temperature (refer to the table).

Relation of Viscosity/Temperature
Temp.
(°F)
(3) Engine Oil Replacement Amount
Total Lubrication Oil Amount
0.69 gal( 2.6 liters)
SAE 30
10W
オイルフィラ
Oil Level Indicator
Oil Filler
OK
Not
Enough Too
Much
Oil Level
Indicator
MIN
MAX
SAE 10W-30
10W
-22 5 32 59 77 86 104
SAE 15W-40
10W