Shindaiwa DG1000MI, Руководство владельца и оператора

Страница: 32 / 52

- 32 -
FIXING SCREW
FREQUENCY ADJUSTING SCREW
THROTTLE LEVER
9 Operation
9.1 Initializing / preparation
:Suffocation from exhaust fume
Exhaust fume from the engine contains many elements harmful to human.
Do not operate this equipment in poorly ventilated area, such as inside a room or in a tunnel
:Suffocation from exhaust fume
Do not point the exhaust fume toward pedestrians or building.
:Fire
Temperature around muffler and exhaust can get extremely high. Keep any inflammable
items (such as fuel, gas, paint, etc.) away from the equipment.
Always operate this equipment on flat surface and, at least 1 meter away from any objects
(wall, box, etc.).
:Injuries
Always place the equipment on a flat and stable surface, to keep the equipment from
sliding.
When starting the engine, turn off the connected equipment and set the circuit breaker to
OFF position.
①
① ①
①
Turn the circuit breaker for single-phase and 3-phase on the control panel to OFF position
② ② ② ②
Set the Throttle Lever to IDLING position.
③ ③ ③ ③
Turn the starter switch to <START> position, and start the engine. In cold environment, turn
the starter switch to <Pre-heating> position, wait until the pre-heating status lamp comes on,
and start the engine
Caution
Caution
Caution
VOLTAGE
REGULATOR
PREHEAT
LAMP
THROTTLE LEVER
STARTER SWITCH
3-PHASE
BREAKER
1-PHASE
BREAKER