background image

3

Work Safely

Trimmers and brushcutters operate at very 

high speeds and can do serious damage 

or injury if they are misused or abused. 

Never allow a person without training or 

instruction to operate this unit!

WARNING!
Use Good Judgment

NEVER

 run the engine when trans-

porting the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventilation. 

Fumes from engine exhaust can 

cause serious injury or death.

ALWAYS

 use the proper cutting tool 

for the job.

ALWAYS

 stop the unit immediately if 

it suddenly begins to vibrate or shake. 

Inspect for broken, missing or improp-

erly installed parts or attachments.

NEVER

 extend trimming line beyond 

the length specified for your unit.

ALWAYS

 keep the unit as clean as 

practical. Keep it free of loose vegeta-

tion, mud, etc.

ALWAYS

 hold the unit firmly with both 

hands when cutting or trimming, and 

maintain control at all times.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark plug 

wire before performing any  

maintenance work.

ALWAYS

, if a saw blade should bind 

fast in a cut, shut off the engine im-

mediately. Push the branch or tree to 

ease the bind and free the blade.

Stay Alert

You must be physically and mentally fit to 

operate this unit safely. 

General Safety Instructions

           WARNING!

Never make unauthorized attachment 

installations. 

WARNING!

Never operate power equip-

ment of any kind if you are tired or if 

you are under the influence of alcohol, 

drugs, medication or any other sub-

stance that could affect your ability or 

judgement.

Содержание BP45

























Отзывы: