14
Switching the traveling data display
The traveling data that can be displayed differs according to the assist bicycle.
1.
On the main screen: <F>
Travel data display
The traveling data switches in the following order each time <F> is pressed.
Display item
Explanation
[DST]
Traveling distance
[ODO]
Cumulative distance
[RANGE]
Traveling range *1
[RANGE]
Traveling range for each assist mode *1 *2 *3
[TIME]
Traveling time *3
[AVG]
Average speed *3
[MAX]
Maximum speed *3
[CADENCE]
Crank rotation speed *3*4
*1
Reference value. The value is displayed when the assist mode is set to a value other than [OFF] or [WALK]. The
battery level cannot be displayed while this is being shown.
*2
It is displayed as shown in the figure. The gear position cannot be displayed while this is being shown.
*3
Whether to show this or not can be set with E-TUBE PROJECT.
*4
It is displayed when the assist mode is set to a value other than [OFF] or [WALK] with electronic gear shifting.
•
If the traveling data display that can be displayed is repeatedly switched, it will eventually switch back to displaying [DST].
