11
SIS Adjustment (SHADOW RD+)
1.
Set the lever switch to OFF.
2.
Operate the shifting lever once to move the chain to the 2nd sprocket.
3.
Then, while pressing the lever just enough to take up the play in the lever, turn the crank arm.
• The best setting is when the shifting lever is operated just enough to take up the play and the
chain touches the 3rd sprocket and makes noise.
•
When shifting to 3rd
Tighten the outer casing adjustment barrel until the chain returns to the 2nd sprocket. (clockwise)
Outer casing adjustment barrel
•
When no sound at all is heard
Loosen the outer casing adjustment barrel until the chain touches the 3rd sprocket and makes noise. (counterclockwise)
Outer casing adjustment barrel
4.
Return the lever to its original position (the position where the lever is at the 2nd sprocket setting and it has been released)
and then turn the crank arm clockwise.
• If the chain is touching the 3rd sprocket and making noise, turn the outer casing adjustment barrel clockwise slightly to
tighten it until the noise stops and the chain runs smoothly.
5.
Operate lever to change gears, and check that no noise occurs in any of the gear positions.
6.
Set the lever switch to ON, and then ride the bicycle normally and check that there are no problems with gear shifting.
7.
For the best SIS performance, periodically lubricate all power-transmission parts.
