MY22H03 - 22_1.0_01.10.2021
191
Maintenance
9
Pull out the outer sleeve end cap from the
counter support on the Postpin interface on the
seat post.
Figure 184: Pulling the end cap out
Removing the outer sleeve and slide bushing
1
Use a 3 mm hex spanner to remove
attachment screw on the outer sleeve.
2
Detach outer sleeve by pulling upwards with
your hand.
3
Pull slide bushing tube out of the seat tube.
Figure 185: Removing the outer sleeve and slide bushing
Caring for the outer sleeve
1
Detach spring washer or outer sealing ring.
Figure 186: Removed spring washer
2
Carefully remove the wiper from the groove.
Figure 187: Removing the wiper
3
Use a small, sharp object to look for and
remove the end of the felt ring.
4
Carefully take out the felt ring.
5
Remove felt ring.
6
Clean or replace felt ring.
Figure 188: Removing the felt ring
7
Clean inside of outer sleeve with a cloth.
Figure 189: Cleaning the outer sleeve
